Rudder shaft stuffing box

Maintenance and refit discussion
Posts: 4
Joined: Sun Sep 16, 2018 11:12 am

Re: Rudder shaft stuffing box

Postby Brasilia » Sun Dec 02, 2018 8:28 pm

Hi John,

sorry for the late reply.
I hope you already succeeded but, in case not, here my experience.

I lifted the clamp up to free the woodruff key: in my case there was not enough space downward to free up the key.
When I did it, moving the clamp up has been the toughest work. Though, the hardest have been the first few millimeters: after it came up easily.

But, before lifting it up, I cleaned and polished the woodruff key (the part reachable above the clamp) and the shaft, with a 1200 sandpaper.

Hope this helps,
Roberto

Posts: 40
Joined: Wed Mar 26, 2014 8:00 pm

Re: Rudder shaft stuffing box

Postby Mallemuk » Tue Dec 11, 2018 8:48 pm

Hi
Thank you for reply with helpfull information. I have managed to dismantle all necessary parts successfully and shall now change the old 6 mm seal and put things together again. Things were pretty stuck and called for a heat gun, tools and a lot of patience together with the skills of an acrobat.
Hopefully this will stop the leak from the rudder shaft.

Regards,
John

Previous

Return to Maintenance and refit

Who is online

Users browsing this forum: Google [Bot] and 1 guest